Chengdu Ebyte Electronic Technology Co., Ltd.
E103-W01 User Manual
【TCP Client configuration】:
Click "Client configuration" to modify the remote port as 6000(corresponding to TCP server), and modify
server IP as 192.168.1.50(refer to PC IP), then click "built connection" button.
See below figure:"CONNECT OK" means connection for TCP server is done.
At present server shows the connection is ok for device which IP address is 192.168.1.70(IP address is assigned
by router).
5
Copyright ©2012–2018 Chengdu Ebyte Electronic Technology Co., Ltd.
9