Chengdu Ebyte Electronic Technology Co., Ltd.
6.6 Modify UART baud rate
No.
E103-W01 module supports 10 standard UART baud rate.
1
The user must not set the baud rate out of the effective range, or there will be an issue when debugging .
If so, please reload the firmware or contact us for help.
User can modify UART baud rate by sending AT+UART command.
2
For example: AT+UART=115200,8,1,0,0
3
For specific instructions, please refer to the AT command set.
Supporting baud rate
7 Specification for networking
7.1 Networking role
No.
1
2
Copyright ©2012–2018 Chengdu Ebyte Electronic Technology Co., Ltd.
Parity
Data length
Stop bit
E103-W01 supports AP mode (router) and STATION mode (wi-fi equipment).
At most 8 wi-fi devices can be supported when module works at AP mode.
E103-W01 including TCP Server、TCP Client and UDP as Socket.
At most 5 sockets can be connected when module works at TCP Server mode.
Based on TCP connection mechanism, if long time connection is needed, please use TCP heartbeat
packet.
Remark
9600
19200
38400
57600
115200
230400
256000
460800
921600
NONE
EVEN
ODD
5 bits
6 bits
7 bits
8 bits
1 bit
2 bits
Remark
E103-W01 User Manual
20