Compaq V710 User Manual page 16

Appendix
Japanese Notice
German Ergonomics Notice
Compaq Computers, when tested with the Compaq V710 monitors, were evaluated and found compliant
to the requirements of ZH 1/618 (German Safety Regulations for Display Work Places in the Office
Sector).
EPA Energy Star Compliance
Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star
program. As an Energy Star Partner, Compaq Computer Corporation has determined that this product
meets the Energy Star guidelines for energy efficiency. Specific details on using the Energy Saving
features can be found in the energy saver or power management section of the computer manual.
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the
monitor to operate on input voltages between 100-120V or 200-240V.
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use
in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a power cord that is
approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and
current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75
mm² or 18AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you
have questions about the type of power cord to use, contact your Compaq authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it
or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the
cord exits from the product.
15