Yamaha YZF-R25 Owner's Manual page 23

Clock
1
1. Clock
The clock displays when the key is
turned to " ".
To set the clock
1. Turn the key to " ".
2. Push the "SEL" button and "RES"
button together for at least two
seconds.
3. When the hour digits start flashing,
push the "RES" button to set the
hours.
4. Push the "SEL" button, and the
minute digits will start flashing.
5. Push the "RES" button to set the
minutes.
6. Push the "SEL" button and then
release it to start the clock.
INSTRUMENT AND CONTROL FUNCTIONS
Fuel meter
1
1.Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank.
When the key is turned to "
display segments of the fuel meter will
sweep once across the fuel level range
and then return to the current amount
in order to test the electrical circuit.
The display segments of the fuel meter
disappear towards "E" (Empty) as the
fuel level decreases. When the last
segment starts flashing, refuel as soon
as possible.
TIP
This fuel meter is equipped with a
self-diagnosis system. If a problem is
detected in the electrical circuit, the fol-
4-5
lowing cycle is repeated until the
malfunction is corrected: fuel level
segments flash eight times, then go off
for approximately three seconds. If this
occurs, have a Yamaha dealer check
the electrical circuit.
Coolant temperature meter
", the
1
1. Coolant temperature meter
The coolant temperature
indicates the temperature
coolant. When the key is turned to "
the display segments of the digital
coolant temperature gauge will sweep
once across the temperature range and
then return to "C" in order to test the
electrical circuit.
4
meter
of the
",