Lexus UX 200 Owner's Manual page 266

ing procedure. (P.179)
● When the engine is restarted by the Stop
& Start system, the power outlet may be
temporarily unusable, but this is not a
malfunction.
Installation and removal of electrical
●
components and wireless devices may
affect the Stop & Start system. Contact
your Lexus dealer for details.
■ If the windshield is fogged up while the
engine is stopped by the Stop & Start
system
Turn the windshield defogger on. (The
engine will start due to the automatic
engine start function.) P.320
If the windshield fogs up frequently, press
the Stop & Start cancel switch to disable the
system.
■ Air conditioning system operation while
the engine is stopped by the Stop &
Start system
If the air conditioning system is being
●
used in automatic mode, the fan speed
may be reduced or the fan may be
stopped while the engine is stopped by
the Stop & Start system in order to
reduce changes in the cabin tempera-
ture.
● To ensure air conditioning system perfor-
mance when the vehicle is stopped, dis-
able the Stop & Start system by pressing
the Stop & Start cancel switch.
If an odor comes from the air condition-
■
ing system while the engine is stopped
by the Stop & Start system
Press the Stop & Start cancel switch to
deactivate the Stop & Start system.
■ Changing the idling stop time with the
air conditioning system on
The length of time the Stop & Start system
will operate when the air conditioning sys-
tem is on can be changed by performing
the following operation. (The length of time
the Stop & Start system will operate when
the air conditioning system is off cannot be
changed.)
4-5. Using the driving support systems
1
Press or
switches and select
2 Press or
switches, select "Vehicle Settings", and
then press "OK".
3
Press or
switches, select
"OK".
4
Press or
switches, select "Standard" or
"Extended", and then press "OK".
The Stop & Start system protection
■
function
● When the volume of the audio system is
excessively high, sound output from the
audio system may suddenly be cut off in
order to reduce battery consumption. To
prevent the audio system from being cut
off, keep the volume of audio system at a
moderate level.
If the audio system has been cut off, turn
the engine switch off, wait for 3 seconds
or more and then turn it to ACC or ON
to re-enable the audio system.
● The audio system may not be activated if
the battery terminals are disconnected
and then reconnected. If this occurs, turn
the engine switch off and then repeat the
following operation twice to activate the
audio system normally.
• Turn the engine switch to ON and then to
off.
Replacing the battery
■
P.449
Displaying the Stop & Start system sta-
■
tus
P.96, 101
Multi-information display messages
■
If the following situations,
sage may be displayed on the multi-infor-
mation display.
When the engine cannot be stopped by
●
the Stop & Start system
265
of the meter control
.
of the meter controls
of the meter controls
, and then press
of the meter controls
and a mes-
4