Table of Contents
Advertisement
248
4-5. Using the driving support systems
Distance options
Medium
Short
Resuming follow-up cruising
when the vehicle has been
stopped by system control (vehi-
cle-to-vehicle distance control
mode)
After the vehicle ahead of you starts
off, press the "+RES" switch.
Your vehicle will also resume follow-up
cruising if the accelerator pedal is
depressed after the vehicle ahead of
you starts off.
Vehicle-to-vehicle
distance
Approximately 40
m (130 ft.)
Approximately 30
m (100 ft.)
1
The speed control is also canceled when
the brake pedal is depressed.
(When the vehicle has been stopped by
system control, depressing the brake pedal
does not cancel the setting.)
2
When your vehicle is too close to a
vehicle ahead, and sufficient automatic
deceleration via the cruise control is
not possible, the display will flash and
the buzzer will sound to alert the driver.
An example of this would be if another
driver cuts in front of you while you are
following a vehicle. Depress the brake
pedal to ensure an appropriate vehi-
cle-to-vehicle distance.
Canceling and resuming the
speed control
Pressing the cancel switch cancels
the speed control.
Pressing the "+RES" switch
resumes the cruise control and
returns vehicle speed to the set
speed.
Approach warning (vehicle-to-
vehicle distance control mode)
Advertisement
Table of Contents
