Driving position memory
*
: If equipped
This feature automatically adjusts
the positions of the driver's seat,
steering wheel, outside rear view
mirrors and head-up display (if
equipped) to make entering and
exiting the vehicle easier or to suit
your preferences.
Up to 3 different driving positions
can be recorded.
Each electronic key (including a
card key) can be registered to
recall your preferred driving posi-
tion.
Enabling easier driver entry and
exit (power easy access system)
When all of the following have been
performed, the driver's seat and steer-
ing wheel are automatically adjusted to
a position that allows driver to enter
and exit the vehicle easily.
The shift lever has been shifted to P.
The engine switch has been turned
off.
3-3. Adjusting the seats
The driver's seat belt has been
*
unfastened.
When any of the following has been
performed, the driver's seat and steer-
ing wheel automatically return to their
original positions.
The engine switch has been turned
to ACC or ON.
The driver's seat belt has been fas-
tened.
■
Operation of the power easy access sys-
tem
When exiting the vehicle, the power easy
access system may not operate if the seat is
already close to the rearmost position, etc.
Customization
■
The seat movement amount settings of the
power easy access system can be custom-
ized. (Customizable features: P.470)
Recording a driving position into
memory
1
Check that the shift lever is in P.
2
Turn the engine switch to ON.
3
Adjust the driver's seat, steering
wheel, outside rear view mirrors
and head-up display (if equipped)
to the desired positions.
4
While pressing the "SET" button, or
within 3 seconds after the "SET"
button is pressed, press button "1",
"2" or "3" until the buzzer sounds.
If the selected button has already been
preset, the previously recorded position
149
3