To Install And Connect The Eject Box - BMW SA640 Installation Instruction

3.7 To install and connect the eject box

Fold out folded page 85.
A
The telephone centre armrest (49) must be ordered separately to match the trim colour
(see ETK / MF for part number).
Lay the connection cables (50 and 51) for the eject box through the recess (52) in the slide unit (48) and slide
the slide unit forwards as shown.
Install the slide unit (48) in the centre armrest (49) and secure it using four Philips screws (14), size 4.2x22.
Connect branch I/6, 18-pin socket casing, to the 18-pin plug casing (50). Clip in the bracket for the plug
connector (19) and secure the plug connector to the centre console. Connect branch I/7, aerial plug, to the
aerial socket (51).
B
Secure the centre console.
Insert the centre armrest (49) and eject box into the centre console and secure it with Philips screws (53).
Push the mobile phone (54) into the eject box and lock it in position.
Install the ventilation nozzle and can holder.
Go back to section 2
3-78/EN