Turning On The Headset - Sony h.ear in 3 Truly Wireless WF-H800 Help Manual

Wireless stereo headset

Table of Contents

Help Guide

Wireless Stereo Headset

h.ear in 3 Truly Wireless (WF-H800)

Turning on the headset

When the headset is set into the charging case

Remove the headset from the charging case.

Remove the left unit of the headset by lifting it to the left from the center of the charging case, and remove the right

unit by lifting it to the right from the center of the charging case.

The headset turns on automatically and the indicators (blue) flash. When you remove only one unit from the

charging case, only the removed unit turns on.

When the headset is not set into the charging case

When the headset is not worn in your ears for about 5 minutes after being removed from the charging case, the headset

turns off automatically. In this case, turn the headset on by pressing and holding the button on the left or right unit of the

headset for about 2 seconds or by wearing the headset. The headset will also turn on when it is set into the charging

case and then removed from the charging case.

When you put on the headset, you will hear the voice guidance say "Power on".

By using the "Sony | Headphones Connect" app, you can change the setting of the headset so that it will not be turned

off automatically.

When the headset is turned on

When both units are removed from the charging case, the connection between the left and right units is established.

The headset goes into Bluetooth pairing mode when turning on the headset for the first time after purchase.