Echo CS-600 Service Manual page 44

42
5-3 Installing clutch assembly (Continued)
F
g
fl at side
J
CLUTCH SYSTEM
G
g
J
H
smoother side
K
4. Apply lithium-based grease to needle bearing
(F). Install clutch drum (G) and needle bearing (F)
on crankshaft, placing the hands (c) of collar (C) in
cutouts (g) of clutch drum.
5. Install sprocket (H). Install circular washer (J),
facing fl at side to sprocket (H).
6. Install new E-ring (K) with smooth side to
washer (J). Use a new E-ring every time clutch as-
sembly is installed on crankshaft.
K
7. Remove piston stopper and reinstall all removed
parts.
CS-600