Replacing Ignition Switch - Echo CS-600 Service Manual

18

3-5 Replacing ignition switch

E
E
IGNITION SYSTEM
C
D
B
B
F
D
1. Remove cleaner lid and cylinder cover.
A
2. Remove two bolts and remove cleaner case (A).
3. Loosen nut (B), and remove ignition switch (C)
and ground lead (D) from the unit. Remove switch
lead (E) from ignition switch.
4. Assemble ground lead (D) and new ignition
switch on the unit, aligning notch of ignition switch
with tab (F) of the unit. Fasten nut (B) on ignition
switch.
5. Assemble switch lead (E) to ignition switch.
CS-600