Siemens SIMATIC IL 77 Quick Start Manual page 18

Hide thumbs Also See for SIMATIC IL 77:
Table of Contents

Advertisement

Unpacking and connecting the device
3.5 Installing drivers and applications
3. Briefly touch the touch screen at every cross hair.
Figure 3-4
4. The following only applies to control units with key panels: Exit the operating system
5. No administrator password is assigned in the factory state. When the logon dialog
Notice
Then configure an administrator password for security.
The installation of the drivers and applications is complete. Further information is available in
the "Operation and Configuration" chapter of the operating instructions under the section
"Additional Drivers and Applications."
Notice
After starting up your device, find out more about the particulars of the operating system in
the chapter "Start-up" in the device's operating instructions under the section "Microsoft
Windows Operating Systems". Further information is available in the chapter "Service and
Maintenance" under the section "Installing Software."
3-6
The next step only applies to control units with touch screen panels.
Once the screen size is selected, the wizard will search for new hardware, the touch
controller. The Panel Wizard closes and the Touch-Base-9-point touch calibration
appears. Carry out the following steps carefully.
Touch screen calibration
session and restart the device. Otherwise the "Security features" from "KeyTools" or
"KeyHook" will not be activated.
Warning
Use "KeyTools" as described in the "Additional Drivers and Applications" section of the
"Operation and Configuration" chapter in the Operating Instructions.
The following applies when the "Security features" of "KeyTools" is deactivated:
When the additional function keys F13 and S16 are used, or when using your own key
code table, serious malfunctions of the user software can occur because the key codes
behind the function keys can also be activated by activating keys other than the
configured ones.
appears the next time the device starts up, therefore, leave the field empty and close the
dialog with the "OK" button.
QuickStart, Edition 10/2004, A5E00327597-01
Panel PC IL 77

Advertisement

Table of Contents
loading

Table of Contents