Philips SBCRU641/87 User Manual page 7

XP SBC RU 641/87
Punch-Through Sound
Punch-through sound enables you to control the audio level of
your first or second TV, regardless of what device mode the
remote control is in.
EXAMPLE:
You have installed a second TV under SAT mode. You can
control that TV's volume when you are in VCR mode. This
feature is installed as a default setting for a first TV.
To install this feature for a second TV:
1
VCR SAT
DVD
TV
2
1 6
3
9 9 3
4
VCR SAT
DVD
TV
5
– That's it! The LED flashes twice to indicate successful set
Functional back-lighting
When you pick up the SBC RU641 and tilt it over about 60
degrees, the main keys for the device you want to operate are
automatically back-lit.
In VCR mode for example, only the main keys that are needed
to operate the VCR are back-lit.
You can choose to have all of the keys back-lit, or you can
switch off the functional back-lighting feature completely.
To back-light all of the keys:
9 • Press keys 1 and 9 simultaneously -for about 3 seconds-
1
– The functional back-lighting is now de-activated and all
Pressing keys 1 and 9 simultaneously again -for about 3
seconds- will return the back-lighting to its preset functional
setting.
N o t e
The back-lighting turns off if you don't move the remote control
or if you don't press a key within 4 seconds.
15-10-2001 12:49
Instructions for use
Press the mode selector key to select VCR.
Press and hold keys 1 and 6 simultaneously -for about 3
seconds- until the green LED lights up.
On the keypad, press keys 9, 9, and 3.
Press the mode selector key to select SAT (second TV).
Press the power key.
up.
The Volume up/down keys now control the volume of your
second (SAT) TV when you're in VCR mode.
until the green LED flashes twice.
keys light up when you pick up the remote control.
Pagina 7
7