Setting Timers - Philips TSU200099 User Manual

4. Edit the macro.
You can move or delete listed commands or you can record new commands.
You can also add delays to the macro (for example, to insert a short pause
between turning on a device and sending commands to it allowing the device
to warm up):
1 Tap Delay.
2 Tap
3 Use the arrow buttons
5 Press the Left button to close the macro.
A confirmation screen appears where you can save or cancel the macro.
6 Tap Save.
The macro is ready to be used.

Setting timers

To activate a device at the time you prefer, you can use the timer.
1 Tap the Macro menu button
2 Open the macro menu and select a timer group.
3 Switch to Edit mode via the Mode button
Empty timer buttons appear in the timer control panel.
4 Tap the button you want to set a timer for.
The first timer control panel appears in which you can set the start time.
5 Enter the command the timer has to execute.
A timer can contain either a single command or a macro.
You can navigate to whatever control panel you want, just as you do in Use
mode.
6 Tap the clock button and set the start time using the Left/Right buttons.
7 Tap one or more day buttons to select or deselect days for the timer.
You can choose to repeat the timer weekly.
Getting the Maximum out of it
or to decrease or increase the length of the delay.
and to move the delay to the right place.
.
.
32