To Exit Setup Mode - Philips TSU200099 User Manual

Second setup panel
Setting
Level
Mode Menu
Touch
Button
Calibrate
Revert
Third setup panel
This panel provides technical information about your Remote Control.

To exit Setup Mode

· Tap the Setup label on the Remote Control icon.
The Remote Control returns to Use mode.
Getting Started
Function
Turns the backlight always on
or off when activating the
touch screen.
Note: When you choose
always off, you can only
activate the backlight using
the backlight button.
Hides or shows the Mode
button.
Adjusts or turns off the touch
screen beep.
Adjusts or turns off the beep
of Left/Right and direct-access
buttons.
Calibrates the touch screen.
Reverts the Remote Control to
the factory default
configuration.
Adjusting
Always on: Tap the Level
button and position the
indicator in the left half of the
indication bar using the Left
button.
Always off: Tap the Level
button and position the
indicator in the right half of
the indication bar using the
Right button.
Tap the Mode Menu button.
Tap the Touch button
repeatedly.
Tap the Button button
repeatedly.
Tap the Calibrate button and
follow the on-screen
instructions.
Tap the Revert button and
follow the on-screen
instructions.
17