Updating The Software; Remote Diagnostics; Information On Data Protection; Declaration Of Conformity - Siemens WM T Series Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Home Connect
en

Updating the software

You can update the Home Connect
software on your appliance. As soon as
a new software update is available, a
note appears in the display: —˜š
Install the update directly via the
message in the display or manually as
follows:
Ensure that you are in the Home
Connect menu. ~ Page 33
Set the programme to position 6.
1.
—˜š (software update) appears in
the display. Старт/Пауза (Start/
Pause) ‹ flashes if a software
update is available.
Press Ü.
2.
¢"à appears in the display.
Press Ü.
3.
The software update may take
Note:
several minutes. Do not switch the
appliance off while updates are being
installed.

Remote diagnostics

If a fault occurs, the after-sales service
can use remote diagnostics to access
your appliance.
Contact the after-sales service, making
sure that your appliance is connected to
the Home Connect server and checking
that the remote diagnostics service is
available in your country.
For more information and to
Note:
check whether the remote diagnostics
service is available in your country,
please visit the Help & Support area of
36
the Home Connect website for your
country: www.home-connect.com

Information on data protection

When your appliance is connected for
the first time to a Wi-Fi network, which is
connected to the Internet, your
appliance transmits the following
categories of data to the Home Connect
server (initial registration):
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
communication module (to ensure a
secure data connection).
The current software and hardware
version of your household appliance.
Status of any previous resetting to
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Ensure that the Home Connect
Note:
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.

Declaration of Conformity

BSH Hausgeräte GmbH hereby
declares that the appliance with
Home Connect functionality meets the
basic requirements and other relevant
provisions of the Directive 2014/53/EU.
A detailed RED Declaration of
Conformity can be found online at
www.siemens-home.bsh-group.com
among the additional documents on the
product page for your appliance.

Advertisement

Table of Contents
loading

Table of Contents