Positioning And Connecting; Included With The Appliance - Siemens WM T Series Instruction Manual And Installation Instructions

Positioning and connecting

en
Energy- and water-consumption
■
information:
These indicators tell you what the
relative energy and water
consumption is for the selected
programs.
The more indicator segments are
visible, the higher the consumption.
This enables you to compare the
consumption levels of the different
programs when choosing your
program settings and to decide on
an energy- and water-saving
program setting if you wish.
– § Energy consumption
– X Water consumption
Energy-saving mode: The touch
■
display lighting goes out after a few
minutes, the Ü button flashes.
Touch the touch display to activate
the lighting.
Energy-saving mode is not activated
if a programme is running.
Automatic switch-off (only until a
■
program starts or after a program
has ended): If the appliance is not
operated for an extended period, it
automatically switches itself off in
order to save energy. Press the main
switch again to switch on the
appliance.
If Wi-Fi is activated, the
Note:
appliance will not switch itself off
automatically.
If the washing will be dried in a
■
dryer, select the spin speed
according to the dryer
manufacturer's instructions.
12
5
Positioning and
connecting
I ncluded with the appliance
P o s i t i o n i n g a n d c o n n e c t i n g
Check that the machine has not
Note:
been damaged in transit.Never use a
damaged machine. If you have any
problems, contact the dealer from
whom you purchased the appliance or
our after-sales service.
Mains cable
(
Bag:
0
Installation and operating
■
instructions
After-sales service location
■
directory*
Warranty*
■
Cover caps for fitting over
■
openings once the transit
securing devices have been
removed
Spanner*
■