Plug Replacement - Qualcast QHTLi40 Instruction Manual

40cm 2000w
Table of Contents

Advertisement

Plug Replacement

(UK & Ireland only)
If you need to replace the fitted plug then follow the instructions below.
Important
The wires in the mains lead are coloured in accordance with the following code:
Blue = Neutral
Brown = Live
As the colours of the wires in the electrical cord of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows. The blue wire must be connected to the terminal marked
with N. The brown wire must be connected to the terminal marked with L.
WARNING! Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 13Amp BS1363/A plug and the correct rated fuse.
NOTE: If a molded plug is fitted and has to be removed, take great care in
disposing of the plug and severed cable; it must be destroyed to prevent
engaging into a socket.
30

Advertisement

Table of Contents
loading

Table of Contents