Table of Contents
Advertisement
Getting Ready
Charging the Battery
Make sure you charge the product when using it for the first time.
Initial charging takes approximately three hours.
Caution
Make sure you install two batteries when using the product.
A
Remove the battery cover.
B
Install two batteries.
Align the charging connectors on the battery with those on
the device, and then press the battery down until you hear it
click into place.
C
Attach the battery cover.
D
Connect the controller, AC adapter, and AC cable.
E
Plug in the AC cable.
The power indicator flashes light blue. Charging is complete
when the power indicator stops flashing and turns light blue.
Disconnect the AC adapter and the AC cable.
Note
When charging is complete with two batteries installed, you can use the
product for approximately four hours. Battery life may vary depending
on the environmental and application usage conditions.
6
Replacing the Battery
This section explains how to replace a battery that is running low
with a battery that is charged. You need to purchase optional bat-
teries and a battery charger for replacement.
The batteries can be replaced when the product is on.
Caution
• Do not remove two batteries at the same time when the product is
on. Stored data and settings may be lost.
• When not using this product for a long time, the charge in the back-
up battery that maintains the date and time settings may run out,
and the date and time are returned to their defaults.
➡ "Date and time settings are reset" p. 20
Note
This product comes with a function that shows you how to replace the
batteries in Battery replacement mode. Press the [
and the [
] key lock button at the same time, and then replace the
batteries by following the directions displayed by the headset.
A
Remove the battery cover.
The battery indicator for the battery being replaced flashes
red.
Note
When the product is off, the battery indicator does not operate.
B
Remove one battery.
While pressing the battery catch, lift out the battery.
] power button
Advertisement
Table of Contents
