Table of Contents
Advertisement
Part Names and Functions
Headset (BT-2000)
Camera
A
Captures images and movies. Remove the protective film before
use. You can adjust the angle of the camera.
Camera indicator
B
Flashes while the camera is operating.
Light sensor
C
Senses the brightness of your surroundings and automatically
adjusts the brightness of the screen.
Head pad
D
Fits against your forehead when wearing the headset. The head
pad is equipped with a built-in sensor to detect the position
and direction of the product.
Lens
E
Displays images. When not displaying images, you can slide up
the lens to the head pad.
16
Lens justifier
F
You can adjust the position of the lens vertically. Adjust the
left and right by the same amount so that the lens is not tilted
during adjustment.
Head band
G
Secures the headset on to your head. You can adjust the length
to fit the size of your head (head circumference: 560 to 640
mm).
Cable securer
H
Secures cables when wearing the headset.
Screw holes to secure the shade/protective shield/
I
lens holder
Install the shade/protective shield using the exterior screw
holes. Install the lens holder using the interior screw holes.
➡ "Installing the Shade/Protective Shield/Lens Holder"
p. 7
Inner pad (B)
J
If the headset feels tight, replace this with the inner pad A or C.
Using a smaller inner pad loosens the headset.
➡ "Replacing the Inner Pad" p. 7
Advertisement
Table of Contents
