Product Overview; Controls - Toro Pro Force 44553 Operator's Manual

Product Overview

Controls

Engine Stop
Press the E S
NGINE TOP
(Figure 8).
1. LED light
2. Rotate left
3. Decrease engine speed
4. Engine start
Engine Start
After completing the starting sequence, press the
E S button to start the engine
NGINE TART
Refer to Starting the Engine (page 15)
sequence.
Nozzle Direction
Press the right or left button to rotate the nozzle to the
desired direction (Figure
Engine Speed
Press the I E
NCREASE NGINE
D E S
ECREASE NGINE PEED
decrease the speed of the engine
the I E S
NCREASE NGINE
S buttons at the same time returns the engine
PEED
to idle.
Ignition Switch
The ignition switch (Figure
and shut off the engine, has three positions: O
R and S . Rotate the key clockwise to S
UN TART
to engage the starter motor. Release the key when
the engine starts. The key moves automatically to the
R position. To shut off the engine, rotate the key
UN
counterclockwise to the O
button to shut off the engine
Figure 8
5. Rotate right
6. Increase engine speed
7. Engine stop
(Figure
for the starting
8).
S (rabbit) or
PEED
(turtle) button to increase or
(Figure 8). Pressing
and D E
PEED ECREASE
9), which is used to start
position.
FF
Choke Control
To start a cold engine, move the choke control lever
(Figure 9) to the O
1. Choke control
g029818
2. Hour meter
Hour Meter
The hour meter
machine operation.
8).
NGINE
,
FF
TART
11
position.
N
Figure 9
3. Ignition switch
(Figure 9) indicates the total hours of
g029819