Lighting Instructions - Fisher & Paykel DCS BE1-30 User Manual

If you are using propane gas, a slight pop or flash may occur at the burner ports a few
seconds after the burner has been turned
1
2
3
10

LIGHTING INSTRUCTIONS

. This is normal for propane gas.
OFF
Remove the cover and any cooking utensils.
Ensure the drip pan is in place.
Push in and hold the selected dial for 2
seconds before turning to SEAR. Hold for 5
seconds to light the selected burner.
If burner does not light in 5 seconds,
turn dial back to
before trying again. This will allow any
accumulated gas to dissipate.
and wait 5 minutes
OFF