Installation; All Auto Search; Manual Search - Ferguson CF2000AT Manual

1. Installation

Use keys to select Installation item from Main Menu and press the OK
key. The Installation menu will display on the screen.

1.1 All Auto search

While All Auto Search window appears on the
screen, system begins to search programs
referring to RF channels system has stored
already. During searching, you can see the
searched RF channels whose relevant
parameter and searching results are shown in
the display window. A dynamic bar at the
bottom of the window reflect the signal strength.
Durinig the searching process, OK key is used to skip current RF Channel and
EXIT key is used to finish the whole process. After searching well, new
searched TV and radio programs will be added to the corresponding program
list and be arranged under categories.

1.2 Manual search

You can set parameters in Manual Search if
you are familiar with relevant parameters. In
this mode, only one RF channel, whose
necessary parameters are set in Manual
Search menu by hand, can be searched.
MUX: Press keys to pop up a drop-down
list box where you can select your desired
option by using keys. Select the desired one and press OK key, the box
disappears and the value in Freq(kHz) varies your selection.
Freq(KHz): Since the value in this item varies the selection in Mux item, it can
11