Advertisement
Quick Links
SELECTRONIC
Integrated Faucet with
Above-Deck Mixing
CAUTION: Use only American Standard supplied
transformers and cable sets. Using non-AS
supplied cables, or cutting, splicing or modifying
any components will void the warranty.
Product No.'s & Options
Specifications
Faucet Installation
Electrical Installation
Start-up / Maintenance
FAQ's / Troubleshooting
Parts
Certified to comply with ASME A112.18.1
© 2017 American Standard
NOTE TO INSTALLER: Please give this manual to the customer after installation.
NOTE TO INSTALLER: Please give this manual to the customer after installation.
To learn more about American Standard Selectronic
or e-mail us at: CRTTEAM@lixilamericas.com
For Parts, Service, Warranty or other Assistance,
please call (844) CRT-TEAM / (844) 278-8326
®
1
2
2
3-4
5-9
9-10
11
®
Products visit our website at: www.americanstandard-us.com
(In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-306-1093)
MODEL NUMBERS
705X.105
705X.205
705X.115
705X.215
M965654 Rev. 2.2 (12/17)
Advertisement
Related Manuals for American Standard SELECTRONIC 705X.105
Summary of Contents for American Standard SELECTRONIC 705X.105
- Page 1 NOTE TO INSTALLER: Please give this manual to the customer after installation. NOTE TO INSTALLER: Please give this manual to the customer after installation. ® To learn more about American Standard Selectronic Products visit our website at: www.americanstandard-us.com or e-mail us at: CRTTEAM@lixilamericas.com...
- Page 2 Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. All American Standard Faucets Are Water Tested At Our Factory. UNPACKING Some Residual Water May Remain In The Faucet During Shipping.
-
Page 3: Installation
(1" min - 5" max) 165mm standards. 140mm (6-1/2) (5-1/2) CAUTION: Use only American Standard supplied transformers and MOUNTING cable sets. Using non-AS supplied cables, or cutting, splicing or 66mm SURFACE modifying any components will void the warranty. ( 2-5/8) -
Page 4: Electrical Installation
Fig. 1 ELECTRICAL INSTALLATION Product Page PWRX Power Kit PK00.WRK) Plug-in AC Powe Kit (PK00.PAC) Hard-Wired AC Prower Kit PK00.HAC) MULTI-AC Power Kit PK00.MAC) PWRX 10-Year Battery Pack Important: The 7055 series faucets come with the standard CR-P2 lithium battery installed in the faucet. No further action required. - Page 5 OR EQUIVALENT BY until installation of faucet is complete. OTHERS (6) Recommended Electrical Box or Equivalent CAUTION: Use only American Standard supplied by others 4” (102mm) SQ. X 2-1/2” (64mm) transformers and cable sets. Using non-AS DEEP 2-GANG ELECTRICAL BOX Appleton #4SD1 OR EQUAL (BY OTHERS).
-
Page 6: Maintenance
COLD NOTE TO INSTALLER: Please give this manual to the customer after installation. To learn more about American Standard Faucets visit our website at: www.us.amstd.com or U.S. customer's e-mail us at: faucetsupport@amstd.com WATER For Parts, Service, Warranty or other Assistance,... - Page 7 CHANGE SENSOR RANGE; Fig. 2 (Factory set at 6") Fig. 2, 3, 4, & 4a 1. Remove the FAUCET SPOUT (1) by unthreading REMOVE the LEVER SCREW (2) and pulling off the LEVER HANDLE (3). Unthread the FAUCET SPOUT SCREW (4) at the back of the FAUCET. Pull REPLACE FAUCET SPOUT (1) up and off.
- Page 8 Fig. 5 1. Remove the FAUCET SPOUT (1) by unthreading the LEVER SCREW (2) and pulling off the LEVER DISCONNECT HANDLE (3). Unthread the FAUCET SPOUT WIRE CONNECTIONS SCREW (4) at the back of the FAUCET. Pull FAUCET SPOUT (1) up and off. See Fig. 2 in this section. 2.
- Page 9 CLEAN FILTER SCREEN ON Fig. 8 SOLENOID VALVE; Fig. 8 & 9 1. Remove the FAUCET SPOUT (1) by unthreading the LEVER SCREW (2) and pulling off the LEVER HANDLE (3). Unthread the FAUCET SPOUT SCREW (4) at the back of the FAUCET. Pull FAUCET SPOUT (1) up and off.
- Page 10 CHANGE HOT LIMIT SETTING FROM 95% TO 85%; Fig. 12 1. Remove the FAUCET SPOUT (1) by unthreading the LEVER SCREW (2) and pulling off the LEVER HANDLE (3). Unthread the FAUCET SPOUT SCREW (4) at the back of the FAUCET. Pull FAUCET SPOUT (1) up and off.
-
Page 11: Troubleshooting Flowcharts
P rod u ct n am e s l i s t ed he re i n a re tra de ma rks o f A S A me ric a , Inc . © 2017 ® To learn more about American Standard Selectronic Products visit our website at: www.americanstandard-us.com or e-mail us at: CRTTEAM@...
Need help?
Do you have a question about the SELECTRONIC 705X.105 and is the answer not in the manual?
Questions and answers