The Push Button Adapter - Husqvarna X-COM R Workshop Manual

3. Attach the battery cable to the circuit board in
position E. Make sure that you put the cable (F)
according to the illustration.
E
F
4. Attach the circuit board (B) with the 4 screws (A).
5. Assemble the left earmuff. Refer to
left earmuff on page 15 .
22 - Repair instructions

7.11 The push button adapter

7.11.1 To disassemble the push button adapter
1. Disassemble the right earmuff. Refer to step 1-4 in
2. Remove the push button adapter (A).
A
B
7.11.2 To assemble the push button adapter
1. Assemble the push button adapter (A).
To assemble the
2. Assemble the right earmuff. Refer to
To disassemble the right earmuff on page 12 .
the right earmuff on page 14 .
A
A
To assemble
893 - 001 -