Repair Instructions; To Clean And Examine The Product Parts; The Headband - Husqvarna X-COM R Workshop Manual

7.1 To clean and examine the product parts

• Clean and examine all parts fully. You find more
instructions in the chapter for each part if special
tools or procedures are necessary.
• Replace damaged or defective parts.
• Always use original spare parts.

7.2 The headband

7.2.1 To disassemble the headband
1. Remove the cable clip.
2. Use a screwdriver to open the slot (A).
A
893 - 001 -

7 Repair instructions

3. Disassemble the headband (B) from the pin (C).
B
C
7.2.2 To assemble the headband
1. Carefully push the headband onto the pin until you
hear a click sound.
A
A
Repair instructions - 11