The Battery - Husqvarna X-COM R Workshop Manual

7.10 The battery

7.10.1 To disassemble the battery
1. Disassemble the left earmuff. Refer to step 1-4 in
disassemble the left earmuff on page 13 .
2. Disconnect the battery cable from the circuit board in
position E.
E
3. Remove the screws (A) and carefully remove the
circuit board (B).
893 - 001 -
4. Remove the battery (C) and foam sheet (D).
To
7.10.2 To assemble the battery
1. Put the foam sheet (D) in the earmuff housing.
A
B
2. Assemble the battery (C).
C
D
C
D
Repair instructions - 21