Product Structure - German pool HTM-560 User Manual

Safety Precautions
17. Do not beat or shake the device when the device is turned on.
18. When the device is working, do not touch the wind outlet, to avoid scalding skin.
19. Be sure the wind inlet & outlet are unblocked to avoid any malfunction appearance; such as
distortion, changing color, etc.
20. Put the power cord in the right way to avoid stumbling over the power cord.
21. Do not allow the power cord to touch the front net cover to avoid the high temperature from
damaging the power cord.
22. Put the device on a flat surface when using. It is strictly prohibited to use the device near or in
bathroom, shower or a swimming pool.
23. The device is hot when in operation, Avoid flammable, explosive articles, as well as environments
full of inflammable air or dust.
24. A fire may occur if the heater is covered with or touches flammable material, including curtains,
drapes, bedding etc. when in operation. KEEP THE HEATER AWAY FROM SUCH MATERIALS.
25. Do not let the power cord hang over the edge of the table or work surface or touch hot surfaces.
26. Do not hang a wet cloth or anything wet above the device, to avoid leakage of electricity.
27. Do not put flammable or cloth on the device, to avoid fire or electric shock.
28. When the device is in operation, please do not place the air outlet and inlet next to the wall or
curtain to avoid obstructing the air and influence the heater effect.
29. Do not place the power cord at the wind outlet, it will damage the insulation layer of wires
30. Do not insert conductive objects into air inlet or outlet, to avoid electric shock.
31. Considering the security, when no one is around, turn off the device, to avoid unpredictable
accidents.
32. The device is not intended to use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction.
33. Make sure power is off and the plug is disconnected when cleaning or repairing.
34. If not using the device for a long period, please disconnect the plug, put the device into the box and
store the device in a dry and ventilated place.
35. Do not attempt to repair, disassemble or modify the device privately when there is some damage
on the power cord or something is wrong with the device.
36. Warning: the heater cannot be directly located under the socket.
P.6

Product Structure

Main Body
1. Front cover 7. Body sensor button
2. Power indicator 8. Dust-proof filter
3. Body sensor indicator 9. Back cover
4. Control panel 10. Power switch
5. Body sensor detector 11. Tip-over switch
6. On/Off button
Control Panel
On/Off button Body sensor button
P.7