Or Higher Using Protectier Manager - IBM System Storage ProtecTIER TS7620 Manual

Upgrading to ProtecTIER version 3.3.2 from version 3.2.x or higher
|
using ProtecTIER Manager
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
Increasing Capacity on the 3959 SM2 (Feature Code 9317)
Use these procedures to upgrade from version 3.2.x or higher to ProtecTIER
version 3.3.2. For the SM2, you cannot upgrade the code from 3.1.8 to 3.2. You can
only upgrade from 3.2.x to version 3.3.2 or from version 3.3.2 to a higher level of
version 3.3.2.
Procedure
1. Open the ProtecTIER Manager. This action displays the ProtecTIER Manager
splash screen and a message that the nodes are initializing.
2. After the nodes initialize, ensure that the All systems view is selected from
the drop down menu in the left hand navigation.
Note that when you start the ProtecTIER Manager, the content page for All
systems view does not display any systems. This is normal. The systems will
display after you log in, and the column headings in the All systems view
will change after you log in. You will be instructed when to log in later in this
procedure.
Note: For a more detailed explanation of the All systems view, see the IBM
System Storage TS7600 with ProtecTIER User's Guide for VTL Systems, IBM
System Storage TS7600 with ProtecTIER V3.3 User's Guide for FSI Systems or the
IBM System Storage TS7600 with ProtecTIER V3.3 User's Guide for OpenStorage
Systems.
3. From the pull-down menu in the left hand navigation, select the system for
which you want to perform a code upgrade by selecting a system from the
drop down menu. Note that the column headings for System Name, Status,
Health, Used (Nom), Allocable (Nom), Storage Saving, Replication
Throughput, and Backup Throughput display after you log in.