Table of Contents
Advertisement
2. Select the Update ProtecTIER Code option. Type the corresponding number
3. Follow the on-screen instructions to prepare the server for the capacity
4. A prompt might ask if you want to stop the VTFD service and continue. Type
8
Increasing Capacity on the 3959 SM2 (Feature Code 9317)
------------------------------------------------------------------------------
ProtecTIER Service Menu running on rassmx
------------------------------------------------------------------------------
1) ProtecTIER Configuration (...)
2) Manage ProtecTIER services (...)
3) Health Monitoring (...)
4) Problem Alerting (...)
5) Version Information (...)
6) Generate a service report
7) Generate a system view
8) Update ProtecTIER code
E) Exit
------------------------------------------------------------------------------
>>> Your choice?
and press Enter.
upgrade.
a. When the message Locating the CDROM device...done displays, put the
ProtecTIER code disk in the DVD tray, close the tray and press Enter
b. After the disk mounts, the code package is extracted.
Mounting... done
Extracting the code package...
c. After the system extracts the new code package, the following output
displays:
Copying files...
Copied.... 100% Done
d. If a previous code package exists, the following message displays:
There are 1 older packages on the system.
Would you like to clear them? (y/[n]) :
Type y and press Enter. When the message Removing packages...done
displays, the older package has been successfully removed.
e. Remove the disk from the drive and press Enter to proceed.
yes to continue.
When the code update starts, these messages display:
Advertisement
Table of Contents
