Set Up An Ipv6 Internet Connection - TP-Link TL-WR850N User Manual

Chapter 4
5 ) If you choose PPTP, enter the
Address Type
to the IP address type you selected.
5. Click Save to make the settings effective, and you can refer to
Connectivity to test the Internet connection.
Note:
It may take 1-2 minutes to make the settings effective.
Tips:
1. You can check your internet connection by clicking
2. If you use Dynamic IP and
please go to Advanced >
3. If you still cannot access the internet, refer to the
4. 3.

Set Up an IPv6 Internet Connection

If your ISP provides information about one of the following IPv6 internet connection
types: PPPoE, Dynamic IP(SLAAC/DHCPv6), and Static IP, you can manually set up an
IPv6 connection.
If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6
connection by referring to
provided by your ISP. Different parameters are needed according
Network Map
PPPoE and you are provided with any other parameters that are not required on the page,
Network > Internet to complete the configuration.
FAQ
Set Up the IPv6
Username and Password, and select the
on the left of the page.
section for further instructions.
Tunnel.
Set Up Internet Connection
Test Internet
IP
15