TP-Link TL-WR850N User Manual page 68

Chapter 10
Note:
If you are not familiar with the settings on this page, it's strongly recommended that you keep the provided default
values; otherwise it may result in lower wireless network performance.
¾ To enable WDS bridging function:
Locate the WDS section and select the
the information of the router to be bridged. Refer to
¾ To enable or disable WPS function:
WPS (Wi-Fi Protected Setup) provides you with an easier approach to set up a security-
protected Wi-Fi connection. This function is enabled by default, but if you do not need
this function, clear the WPS
¾ To create guest-SSID network:
The router supports additional up to three guest-SSID wireless networks for client
access. You can specify the access and security settings to ensure network security
and privacy according to your situation.
1 ) Locate the Guest-SSID
box(es) to enable the corresponding guest-SSID network.
2 ) Enter a new
sensitive. Don't select
the SSID for Wi-Fi access.
Enable WDS Bridging
Enable check box and then click Save.
section, and select the
Network Name (SSID)
Hide SSID unless you want your guests to manually input
Customize Your Network Settings
check box. And then set
FAQ for detailed instructions.
Enable SSID 1 (2
or use the default name, this field is case
or 3) check
64