Connect To Your Tv; Setting Up Your Antenna - Philips SDV2740/55 User Manual

3.2 Connect to your TV

Connect one end of the coaxial cable to
1
signal output of the antenna and the other
end to the input on your TV receiver.
Connect the DC plug to the antenna and
2
the power adaptor to a 100-240V AC
outlet.
2

3.3 Setting up your antenna

Antenna can be set up on a flat surface (table)
on a horizontal or vertical position.
D Note
Horizontal position for UHF and VHF.
Vertical position for UHF only, and keep the
dipoles to minimum length.
Horizontal position: Attach the stand to the
back of the antenna in a horizontal position
using the two screws provided.
Vertical position: Attach the stand to the back of
the antenna in a vertical direction using the two
screws provided.
4
Mounting on the Wall: Mount two wood screws
with center distance of 63 mm (2.5") into the
wall. Hang the two notch holes onto the two
wood screws on the wall.
14
1
3
5
1
TV
ANT.
2
3
4
5