Connect To Your Tv; Using Your Television Antenna; For Vhf/Fm Reception; For Uhf Reception - Philips SDV2710/55 User Manual

3.2 Connect to your TV

Open the antenna and connect the coaxial
1
cable to the input on your TV receiver.
Open the supporting plate on the back of
2
the antenna (maximum angle of opening
is 120 degrees) in order to make the
antenna stand straight.
4 Using your indoor
television antenna

4.1 For VHF/FM reception

Extend the telescoping dipoles to the
1
longest possible length.
Turn your TV or FM radio to the desired
2
channel/station. Adjust the dipoles by
moving in different directions up and down,
until reception is achieved.

4.2 For UHF reception

Turn your TV to the desired channel.
1
Point the UHF reflector towards the
2
transmitter until reception is achieved.
Note
D
For best results you should point your antenna
in the direction of the transmitter.
1
2
3
4
5
TV
ANT.
-or-
13
1
2
3
4
5