Key To Symbols; Symbols On The Machine - Husqvarna K 4000 Cut-n-Break Operator's Manual

Symbols on the machine:

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the heading
"Personal protective equipment".
WARNING! Dust forms when cutting,
which can cause injuries if inhaled. Use
an approved breathing mask. Always
provide for good ventilation.
WARNING! Sparks from the cutting
blade can cause fire in combustible
materials such as: petrol (gas), wood,
dry grass etc.
Water cooling must always be used.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and
understand the instructions in the
manual before using the machine.
WARNING! Ensure the blades are not
cracked or damaged in any other way.
WARNING! Do not use circular saw
blades
Always cut in the correct direction. See
safety instructions!
Conforms to UL Std 60745-1, 60745-2-
5 Certified to CSA C22.2 No. 60745-1,
60745-2-5.
4005474
2 - English

KEY TO SYMBOLS

Type plate
Row 1: Brand, Model
(X,Y)
Row 2: Serial No.
with manufacturing
date (Y, W, X): Year,
Week, Sequence No.
Row 3: Product No.
(X)
Row 4: Manufacturer
Row 5: A: Max speed of output shaft, B: Cutting blade
diameter, C: Blade bolt diameter
Row 6: D: Input voltage, E: Input current, F: Input
frequency
Row 7: Country of origin
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
XXXXXXXXX YYYY
s / n YYYY WWXXXXX
XXX XX XX-XX
Husqvarna AB
AAAAAA BBBBB CC
DDDD EEEE FFFF
XXXXXXXXXXXXXXX