Junghans Worldtimer Chronoscope Manual page 8

T2
Display of actual date, the calendar week is shown in place of the seconds.
Press the T1 "MODE" button repeatedly until you reach the display for date
and seconds. By the repeated press of the T1 "MODE" button the calendar
week is indicated.
50
By pressing the T3"+" or T5"–" buttons
respectively, the displayed digital time
can be adjusted in steps of 1 hour. The
T3
analogue hour disc will be follow the
adjustment. The date will be displayed
according to the setted time zone. This
function can prove useful during longer
stays overseas. To confirm, please press
T5
the T2 "SET" button. If a button is not
pressed within approx. 9 seconds the
setting will be automatically confirmed.
T2
T1
T2 T3
T5
The calendar week is displayed in German and English by "W52", in French by
"SE52".
On delivery, the day of the week display
on your Junghans Worldtimer
Chronoscope is set to the German lang-
uage. To change to English or French,
press the T1 "MODE" button repeatedly
until you reach the mode "Date / calen-
dar week". By pressing the T2 "SET" but-
ton for > 3 seconds you enter the mode
for setting the language. The "D" symbol
will start to flash.
Using buttons T3 "+" or T5 "–" you can set
the favoured language. To confirm, plea-
se press the T2 "SET" button, if a button is
not pressed within approx. 9 seconds the
setting will be automatically confirmed.
= German day of the week display
= English day of the week display
= French day of the week display
51