Fluigent LineUp Series Quick Start Manual page 6

Power on
To wall socket
6
Once powered on, the Flow EZ
Push-Pull
will display the "Inlet
pressure check window", giving the
measured pressure at the inlet
(P inlet) and the supply pressure
required to operate the pressure
controller (P target).
For example, left shows a 1000 mbar
range Flow EZ
TM
P target : 1100 mbar
P inlet : 0 mbar
Note : For the 7000 mbar range as
well as negative
Flow EZ , this window will not appear.
TM
QUICK START GUIDE
or
TM
pressure ranges