Dell Latitude System Media Base PR09S Setup Manual page 17

NOTICE:
If the computer does not have a charged battery in the battery bay, you must shut down the computer
before undocking. If you undock the computer without a battery before shutting it down, you will lose data and the
computer may not recover normal operation for several minutes, if at all.
3 If your computer does not have a charged battery in the battery bay, shut down the computer through
the Windows Start menu.
4 If your computer has a charged battery in the battery bay, prepare the computer for undocking by doing
one of the following:
• Click the Start button and click Undock Computer.
OR
• Press the undock button on the left side of the
The lights on the
undock your computer.
5 If your media base is secured, remove the lock.
6 Pull the computer release lever forward (see "Left View" on page 8) to release the computer.
7 Lift the back of the computer up and slide the computer out towards the back of the
turn off and an Undock Complete message states that you can now
media base
for 1 second (see "Left View" on page 8).
media base
Media Base Setup Guide
.
media base
15