Exchange Of Filter Element - Makita VC2012L Service Manual

If you put Motor on Base plate when assembling the Motor, the position of Upper and Lower Sealings
will be shifted, and the Sealings will be pinched between the parts. Therefore, make sure to put the
Motor on Clamping plate side, and then attach the Base plate from above.
*Note: When putting Motor on Clamping plate, make sure that the terminal part of Motor comes close
to the holes (refer to the frame in the picture) for passing the wires.

5. EXCHANGE OF FILTER ELEMENT

BASE PLATE WITH
AIR OUTLET
FILTER
SUPPORT CAGE
BASE PLATE WITH
AIR OUTLET
CLAMPING
PLATE
Remove Filter support cage by turning it counterclockwise as
shown in the picture. Then, remove Filter element.
FILTER ELEMENT
BASE PLATE WITH
SEALING FILTER
AIR OUTLET
7
CLAMPING
PLATE