Radio Shack Racing Scanner User Manual page 15

Key Tone
1. Follow steps 1 and 2 under "Settings" and select
2. Use SEL/VOL to select
press ENT.
n
Note: Turning key tones off does not turn off the error beep.
Power Save
Your scanner features a power save circuit that is automatically
activated when you monitor a single car number frequency. This
allows the receiver to "Sleep" briefly while waiting for a call on the
selected channel. Power save is off by default.
1. Follow steps 1 and 2 under "Settings" and select
2. Rotate SEL/VOL to choose
, then press ENT.
OFF
Display
1. Follow steps 1 and 2 under "Settings" and select
2. Rotate SEL/VOL to
3. Contrast is set to 08 by default. Rotate SEL/VOL to increase or
decrease the contrast (between 0 and 15) then press ENT.
4. Frequency display is on by default. Rotate SEL/VOL to select
or , then press ENT.
OFF
Back Light
You can set the back light to turn on when you press any button, or
only when you press the G / î button.
1. Follow steps 1 and 2 under "Settings" and select
2. Rotate SEL/VOL to choose
press) or
Light OFF
press ENT.
Key Tone ON
Power Save ON
or
Contrast Frequency
Light ON
(light turns on when you press G / î), then
15
Key Tone
or
Key Tone OFF
Power Save
or
Power Save
Display
and press ENT.
Back light
(light turns on with any key
.
, then
.
.
ON
.