Westinghouse REHR6 Series User Manual page 5

INSTALLATION
Ducting accessories - REHR6* WR H605I* WR
H608I* WRR614*A WRH908I* WRR604*B WRR904*B
WRR614*B WRR914*B
For best performance Ø 125mm ducting is recommended
roof cowl
AR125RC
AR125F
AR125FD
AR125FJ
wall vent kit
AR125WV
Accessories can be bought from your local appliance
retailer, or in Australia at our online spare parts and
accessories store: shop.electrolux.com.au
Drilling holes
Drill the holes on top wooden support.
• drill Ø7 hole
• drill Ø45 hole
• cut Ø130 hole
Ø7, for hood
fastening screws
Ø130, for
ue clearance
470/770
Front of cabinet
bend AR125B
ARCFD (quality
depends on
model)
Ø45, for cable
clearance
Door / hood fascia
Fixing duct spigot
Snap in duct spigot to the rangehood.
Fixing the rangehood
Use 4 x M6x40 screws and washers supplied to fasten
the cooker the wood support from upper side.
Fixing flue pipe
Fix a 125mm diameter noncombustible rigid flue pipe.
Fix flue pipe to the exhaust transition duct. Use cable ties
or aluminium tape to secure flue pipe to the duct spigot.
If using a flexible duct, install with the wire helix pulled taut
to minimise pressure loss and noise.
5