Operation - auna Areal Bar 750 Manual

EN
34

OPERATION

Power on/standby 8c pairing the subwoofer to the sound bar at the first
time use
Before connecting the AC power, ensure that the power supply voltage
corresponds to the voltage printed on the back or the underside of the unit.
1. Insert the DC plug of the AC-DC power adaptor into the DC IN jack
on the back of the main unit, then connect the AC-DC adapter to a
convenient wall outlet.
2. Press the O button to switch the sound bar on. The LED display will light
up and show the current playback mode.
3. Plug the plug of subwoofer into the main power supply.
4. Press the Power On/Off Switch on the back of the subwoofer to "ON"
position to turn it on, the subwoofer will wirelessly connect with the
sound bar automatically, the Wireless Pairing Indicator changes to
steady red once the connection is carried out successfully.
In case the subwoofer can't connect with the sound bar automatically for
the first time use,you need to pair them manually.
1. Ensure the sound bar and subwoofer is powered on.
2. Press and hold the Play/Pause button on the remote control for about
3 seconds to choose CH1 or CH2, then press pairing button on the back
of subwoofer to choose CH [Blue LED indicator flash once] or CH2[Blue
LED indicator flash twice].
3. If both sound bar and subwoofer are CH 1 or CH2, the subwoofer will
be connected automatically with the sound bar and the LED indicator
changes to steady red, the connection is successfully established now.
Note: Only one playback unit can be connected to the speaker. If the
speaker is already connected to another playback unit, the speaker will not
appear in the BT selection list.
4. If your device asks for a passkey [depending on the device
manufacturers, model, and software version], then enter digits
"OOOO"(four zeros) and press OK. If pairing has been carried out
successfully, a prompt sound is heard, meanwhile, the "BT" symbol stops
flashing.
5. After the connection is complete, you can listen to music wirelessly
through BT and select music from your BT device.
6. Press the / buttons on the remote control or the"+"/"-" buttons on
the main unit to raise/lower the volume level.
7. To disconnect the BT function, switch to another function on the unit or
disable the function from your BT device.