Usb Operation - auna Bazzter Manual

USB OPERATION

This unit provides 2 USB ports for music playback.
1. Press the FUNCTION button on unit to select USB mode.
2. Plug the USB memory stick to the USB port on top of the unit. Playback
will start automatically from Track 1.
3. To pause playback, press the PLAY/PAUSE/PAIR button on unit. The
playing time will flash on the display.
4. To resume playback, press the PLAY/PAUSE/PAIR button again.
5. To select a desired track, press the
playing until the desired track appears on the display. The unit will start
play automatically.
6. To search for a particular passage during playback, press and hold the
/ button to scan the current playing track at high speed until
desired point (passage) appears, then release the button for normal
playback mode.
7. To select a song which track number exceeds 10, press the 10/FOLD.+
or 10/FOLD.- button each time to skip forward/backward 10 tracks, then
press the /
8. To select a desired folder (if the USB contains more than one folder),
press and hold the 10/FOLD.+ or 10/FOLD.- button each time to skip
forward/backward a folder, then press the
desired track.
Note: The USB port is intended for data transfer only, other devices
cannot be used with this USB connection. The use of USB extension
cords is not recommended. Don't plug the USB from the unit when
playing or reading the USB device.
/
button to select desired track.
button respectively during
/ button to select
EN
21