Operation - auna Milano Manual

OPERATION

Voice output
In the following situations, you will hear voice output from the speakers:
• When the unit is turned on,
• When the unit is turned off,
• When waiting for a bt connection,
• When a bt connection is established,
• When a bt connection is disconnected,
• When the volume is set to maximum,
• When the battery is weak and needs charging.
Switching the unit on/off
• Press and hold the On button and you will hear „Power on" from the
speakers. The unit will automatically activate BT and you will hear „BT
waiting for connection" from the speakers. You can now connect your
smartphone or pad to the speakers via BT.
• Press and hold the Off button and you will hear „Power off" from the
loudspeakers. The device will then turn off.
AUX Auto Switch
• Plug the AUX cable into the AUX jack on the back of the speaker. The
speaker will automatically switch to AUX mode and the blue and green
LED lights will illuminate. BT mode is automatically turned off.
• After removing the AUX cable, the BT mode is automatically turned on
again, then „BT waiting for connection" sounds from the speakers.
EN
21