Disconnecting The Connection To The Bluetooth Device On The Radio - Volkswagen RMT200 User Handbook Manual

BDA 051 228 A BA Radio RMT 200.book Seite 118 Freitag, 20. Juli 2012 12:21 12

Disconnecting the connection to the Bluetooth device on the radio

MODE
Keep the button pressed until the name of the coupled Bluetooth device is shown in the display.
SET
Press the function button to call up the menu "BLUETOOTH". Press the
disconnect the existing connection to the Bluetooth device.
Reconnecting a coupled Bluetooth device with the radio again
The Bluetooth device has to be switched on and Bluetooth activated.
MODE
Keep the button pressed until the "BLUETOOTH" is shown in the display or the name of the
Bluetooth device coupled is displayed.
CON
Press the function button.
The DEVICE LIST menu is opened.
Press the function button
If the desired Bluetooth device is displayed, keep the respective function button pressed until
"SELECTED" is shown in the display.
The Bluetooth device selected is connected. An existing Bluetooth connection being carried out at this
point is disconnected. This procedure may take several seconds.
Delete coupling
MODE
Keep the button pressed until the name of the current Bluetooth device coupled is shown in the
display.
MENU
Press the button to call up the menu "BT CONFIG".
DEL
Press the button and, where necessary, using the rotary knob
deleted.
Confirm deleting the coupling by pressing the function button
If this Bluetooth device should be used again, it has to be re-coupled (
devices").
Bluetooth menu
In the Bluetooth menu BT CONFIG, you are able activate different functions and carry out settings.
In order to call up the BT CONFIG menu, keep the
shown in the display or the name of the Bluetooth device coupled is displayed. Then press the
button.
If no other selections are made then the menu is closed automatically after a few seconds.
Phone book transfer (APB)
The entries and call numbers saved in the phone book of the mobile phone can be transferred to the
memory of the radio and saved there. These phone book entries saved can be called up for calling a call
number using the operating elements of the radio. The phone book data is only visible when the
corresponding mobile phone is connected and they are therefore not visible for other users of the
vehicle.
In the BT CONFIG menu, press the
If necessary, access to the phone book data still has to be permitted on the phone.
Data transfer is started and is indicated by "PB DOWN" in the display of the radio. This may take a little
time depending on the size of the data saved. "PBA SAFE" is shown in the display at the end of the data
transfer.
118
11
briefly in order to display the name of the coupled Bluetooth device.
MODE
MENU
button and then the
DIS
button in order to
1
select the coupling to be
DEL
.
Page 117 "Coupling Bluetooth
button pressed until "BLUETOOTH" is
APB
function button.
MENU