Table of Contents
Advertisement
1. Introduction
Congratulations on your purchase of the DynaPak 2020
Sampler.
Before installation, insure that all of the components are
present. You may or may not have ordered a sample
cylinder with your DynaPak System. Regardless, you will
need a cylinder during installation. If you have any ques-
tions about installation/operation, contact your YZ represen-
tative or YZ Customer Service at 936.788.5593.
2. System Components
The primary components of the DynaPak 2020 Sampler are
illustrated here.
Z-200 Controller
Z-65 Controller
Factory
Mutual
System
Approved
Factory
Mutual
System
Approved
YZ SYSTEMS, INC.
YZ SYSTEMS, INC.
3101 POLLOK DRIVE CONROE, TEXAS 77303
Patents 5,152,678; 4,531,895; 4,928,536
3101 POLLOK CONROE, TEXAS 77303
Patents 5,152,678; 4,531,895; 4,928,536
Note:
YZ
Systems,
Inc.
•
3101
DynaPak 2020N 09242003 ATEX Rev.
Cable Entry Fitting
Cable Entry Fitting
DP-2010N
N
1949
1949
Filter/Regulator
Wiring and Pneumatic Tubing Not
Shown For Drawing Clarity
Pollok
Drive
•
Conroe,
Solenoid Valve
8 1/2" (22 cm)
6" (15cm)
Sample Inlet
Texas
•
USA
•
77303
10 1/2" (27 cm)
8" (20cm)
DynaPak 2000N Pump
DynaPak 2000 Pump
Sample Discharge
Tubing
Sample Discharge
Purge Valve
Isolation Valve
Probe Body Assembly
•
P:
936.788.5593
•
F:
5
936.788.5720
Advertisement
Table of Contents
