Siemens SIMATIC S7 3964 Connection Manual page 13

4.2 Setup Items in Off-Line Mode
• Please refer to GP3000 Series User Manual for more information on how to enter off-line mode or
about operation.
Cf. GP3000 Series User Manual "Chapter 4 Setting"
Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings] in the off-line mode. Touch
the External Device you want to set from the displayed list, and touch [Communication Settings].
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
Flow Control
Timeout
Retry
Wait To Send
GP-Pro EX Device/PLC Connection Manual
Select the SIO type to communicate with the External Device.
Select speed between the External Device and the Display.
Select data length.
Select how to check parity.
Select stop bit length.
Select the communication control method to prevent overflow of transmission and
reception data.
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
SIMATIC S7 3964(R)/RK512 Driver
Setup Description
13