Replace The Instrument Cover; Reconfigure And Recalibrate The Instrument - Ametek LAND 4500 MkIII Installation Manual

Installation Guide
5

Replace the instrument cover

1) Carefully replace the cover,
ensuring that it doesn't jam
on any components. When the
cover is close enough, refit the
keyboard connector ribbon.
2) Ensure the white cord seal is
correctly seated before pushing
the cover home.
3) Secure the cover with the eight
screws.
4) Apply 24 V dc power and
check display and keyboard
functionality.
6

Reconfigure and Recalibrate the Instrument

All setup and calibration parameters are stored on the main board.
Replacing this board erases the instrument's calibration and configuration, so it
will be necessary to reinstall these parameters and recalibrate the instrument.
Model 4500 MkIII
Main PCB
Page 5