Lumascape Linealux L3 LS9031 Installation Instructions Manual

Linealux L3
Installation Instructions
LS9031
Linear Facade
Lite
READ ALL SAFETY INSTRUCTIONS FIRST
› Follow instructions carefully, failure to do so will void
warranty.
› Ensure installation complies with local law and
applicable standards.
› Input voltage range 120-277 V
› Only use Lumascape power supply, control
equipment and leader cables.
› Ensure mains input power is surge protected.
ASIA PACIFIC
18 Brandl Street, Eight Mile Plains, QLD 4113, Australia P: +61 7 3854 5000 | F: +61 7 3854 5001 | Email: sales@lumascape.com.au |
NORTH AMERICA
1300 Industrial Road, Unit #19, San Carlos, CA 94070, USA Phone +1 650 595 5862 | Fax +1 650 595 5820 | Email: info@lumascape.com |
LS9031
› Never make connections whilst the power is
connected.
› Do not make modifications or alter the product.
› Keep luminaire clean and free of debris.
› Connectors are to be kept clean and dry at all times.
› Once installed, all connectors are to be mated and a
terminating plug is required on the last fitting of run.
Products and specifications are subject to change without notice.
LS9031
www.lumacape.com.au
www.lumacape.com
IN0206 N190610 1 / 9