Checking And Replacing Fuses - Hyundai Getz 2004 Owner's Manual

6- 26
DO-IT-YOURSELF MAINTENANCE
Drive belts should be checked periodi-
cally for proper tension and adjusted if
necessary. At the same time, belts
should be examined for cracks, wear,
fraying or other evidence of deteriora-
tion and replaced if necessary.
Belt routing should also be checked to
be sure there is no interference be-
tween the belts and other parts of the
engine. After a belt is replaced, the
new belt should be adjusted again
after two or three weeks to eliminate
slack resulting from initial stretching
after use.
TBENG_6.P65 26
G190B01TB-GAT
CHECKING DRIVE BELTS
(Diesel)
Alternator
Auto tensioner
Pulley
Power
steering
pump
A/C comp.
G190B01TB
At the scheduled maintenance inspec-
tion, belts should be examined for
cracks, wear, fraying or other evidence
of deterioration and replaced if neces-
sary.
Belt routing should also be checked to
be sure there is no interference be-
tween the belts and other parts of the
engine.
G200A01A-AAT
CHECKING AND REPLACING
FUSES
Replacing a Fusible Link
Melted Good
A fusible link will melt if the electrical
circuits from the battery are ever over-
loaded, thus preventing damage to the
entire wiring harness. (This could be
caused by a short in the system draw-
ing too much current.) If this ever
happens, have a Hyundai dealer de-
termine the cause, repair the system
and replace the fusible link. The fusible
links are located in a fuse box for easy
inspection.
3/9/2005, 5:04 PM
G200A01L